Deltabar Pmd71 Pmd72 Electronic Differential Pressure Transmitter Endress+Hauser Flowmeter

• Customization: Available
• Task: Program
• Structure: Combination
• Model NO.: Deltabar PMD71 PMD72
• Signal: Continuous
• Function: Automatic Control
• Certification: RoHS, CCC, ISO: 9001, CE
• Condition: New
• Customized: Non-Customized

Product Description

 

Product Description

 

Electronic
differential pressure
Deltabar FMD71

Electronic differential pressure system utilizing two ceramic sensor modules and one transmitter

Specs at a glance
Accuracy
Standard:
0.075% of individual sensor,
"PLATINUM" 0.05% of individual sensor

Process temperature
-25...+150°C
(-13...+302°F)

Pressure measuring range
100mbar...40bar
(1.5psi...600psi)

Process pressure / max. overpressure limit
60 bar (900 psi)

Material process membrane
Ceramic
316L, AlloyC

Measuring cell
100 mbar...40 bar
(1.5 psi...600 psi)

Field of application
The electronic dp Deltabar FMD71 is a differential pressure system, used to measure the pressure or level, volume or mass of liquids in pressurized tanks or distillation columns/evaporators. The high pressure sensor (HP) measures the hydrostatic pressure. The low pressure sensor (LP) measures the head pressure. The level is calculated in the transmitter using these two digital values. The electronic dp system eliminates issues of traditional differential pressure measurements.
Benefits
Eliminates traditional mechanical issues resulting in greater process availability and reliability
Overload-resistant high purity ceramic sensor (99.9% Al2O3)
Safety risks are minimized with the new electronic differential pressure system architecture and design
Lowest total cost of ownership due to reduced installation time, maintenance, downtime and spare requirements
Multivariable level measurement: HART-based differential pressure, head pressure and sensor temperatures from one system
Continuous health indication of the entire system via HART-based diagnostic
High reproducibility and long-term stability
For differential pressure, level, volume or mass measurement of liquids in pressurized tanks and distillation columns/evaporators.
Process connections: Threads, flanges and hygienic connections
Process temperature: -40 up to +150°C (-40 to +302°F)
Measuring range: 100mbar to +40bar (6 to 600psi)
Accuracy: Single sensor up to ±0.05%, system up to ±0.07%
International explosion protection certificates, hygienic

Product Parameters

Product Selection
PMD71-
ACJ	NPS 1" Cl.150 RF, 316/316L flange ASME B16.5
AEJ	NPS 1-1/2" Cl.150 RF, 316/316L flange ASME B16.5
AFF	NPS 2" Cl.150 RF, PVDF, flush mount flange ASME B16.5 max 10bar/150psi; -10..60oC/14..140oF
AFJ	NPS 2" Cl.150 RF, 316/316L flange ASME B16.5
AFN	NPS 2" Cl.150, ETFE>316/316L flange ASME B16.5
AGF	NPS 3" Cl.150 RF, PVDF, flush mount flange ASME B16.5 max 10bar/150psi; -10..60oC/14..140oF
AGJ	NPS 3" Cl.150 RF, 316/316L flange ASME B16.5
AGN	NPS 3" Cl.150, ETFE>316/316L flange ASME B16.5
AHJ	NPS 4" Cl.150 RF, 316/316L flange ASME B16.5
AHN	NPS 4" Cl.150, ETFE>316/316L flange ASME B16.5
ANJ	NPS 1" Cl.300 RF, 316/316L flange ASME B16.5
AQJ	NPS 1-1/2" Cl.300 RF, 316/316L flange ASME B16.5
ARJ	NPS 2" Cl.300 RF, 316/316L flange ASME B16.5
ASJ	NPS 3" Cl.300 RF, 316/316L flange ASME B16.5
ATJ	NPS 4" Cl.300 RF, 316/316L flange ASME B16.5
CFF	DN50 PN10/16 B1, PVDF, flush mount flange EN1092-1 max 10bar/150psi; -10..60oC/14..140oF
CGF	DN80 PN10/16 B1, PVDF, flush mount flange EN1092-1 max 10bar/150psi; -10..60oC/14..140oF
CNJ	DN25 PN10/40 B1, 316L flange EN1092-1
CPJ	DN32 PN10/40 B1, 316L flange EN1092-1
CQJ	DN40 PN10/40 B1, 316L flange EN1092-1
CQP	DN40 PN10/40, ETFE>316L flange EN1092-1
CRP	DN50 PN25/40, ETFE>316L flange EN1092-1
CSP	DN80 PN25/40, ETFE>316L flange EN1092-1
CXJ	DN50 PN10/40 B1, 316L flange EN1092-1
CZJ	DN80 PN10/40 B1, 316L flange EN1092-1
GCC	Thread ISO228 G1/2 EN837, AlloyC
GCD	Thread ISO228 G1/2 EN837, Monel
GCF	Thread ISO228 G1/2 EN837, PVDF
GCJ	Thread ISO228 G1/2 EN837, 316L
GLC	Thread ISO228 G1/2 G1/4 internal, AlloyC
GLD	Thread ISO228 G1/2 G1/4 internal, Monel
GLJ	Thread ISO228 G1/2 G1/4 internal, 316L
GMC	Thread ISO228 G1/2 hole 11.4mm, AlloyC
GMD	Thread ISO228 G1/2 hole 11.4mm, Monel
GMJ	Thread ISO228 G1/2 hole 11.4mm, 316L
GNJ	*Thread JIS B0202 G1/2 male, 316L
GOJ	*Thread JIS B0203 R1/2 male, 316L
GVC	Thread ISO228 G1-1/2, AlloyC, fm= flush mount
GVD	Thread ISO228 G1-1/2,Monel,flush mount
GVJ	Thread ISO228 G1-1/2, 316L,flush mount
GWC	Thread ISO228 G2, AlloyC, flush mount
GWD	Thread ISO228 G2, Monel, flush mount
GWJ	Thread ISO228 G2, 316L, flush mount
G1J	Thread DIN13 M20 EN837 hole 3mm, 316L
G2C	Thread DIN13 M20 EN837 hole 3mm,AlloyC
G4C	Thread DIN13 M44x1.25, AlloyC, fm= flush mount
G4J	Thread DIN13 M44x1.25,316L,flush mount
KFJ	10K 50A RF, 316L flange JIS B2220
KGJ	10K 80A RF, 316L flange JIS B2220
KHJ	10K 100A RF, 316L flange JIS B2220
MRJ	DIN11851 DN50 PN25 slotted-nut, 316L, 3A with seal FDA
MZJ	DIN11851 DN40 PN25 slotted-nut, 316L, 3A with seal FDA
NCJ	DIN11864-1 A DN40 PN16 pipe DIN11866-A, slotted-nut, 316L, 3A with seal FDA
NDJ	DIN11864-1 A DN50 PN16 pipe DIN11866-A, slotted-nut, 316L, 3A with seal FDA
PDJ	DN50 PN63 B2, 316L, flush mount flange EN1092-1
RJF	Thread ANSI MNPT1/2 hole 3mm, PVDF
RKC	Thread ANSI MNPT1/2 hole 11.4mm,AlloyC
RKD	Thread ANSI MNPT1/2 hole 11.4mm, Monel
RKJ	Thread ANSI MNPT1/2 hole 11.4mm, 316L
RLC	Thread ANSI MNPT1/2 FNPT1/4, AlloyC
RLD	Thread ANSI MNPT1/2 FNPT1/4, Monel
RLJ	Thread ANSI MNPT1/2 FNPT1/4, 316L
R1C	Thread ANSI FNPT1/2, AlloyC
R1D	Thread ANSI FNPT1/2, Monel
R1J	Thread ANSI FNPT1/2, 316L
S4J	NEUMO BioControl D50 PN16, 316L, 3A with seal FDA
TDJ	Tri-Clamp ISO2852 DN40-51 (2"), 316L, DIN32676 DN50, 3A with seal FDA
TFJ	Tri-Clamp ISO2852 DN76.1 (3"), 316L, 3A with seal FDA
TIJ	DRD DN50 65mm PN25, 316L
TMJ	APV-Inline DN50 PN25, 316L, with seal FDA
TQJ	Varivent F pipe DN25-32 PN40, 316L, 3A with seal FDA
TRJ	Varivent N pipe DN40-162 PN40, 316L, 3A with seal FDA
UNJ	Universal adapter 44mm 316L, incl. EPDM shape seal, 3A
UPJ	Universal adapter 44mm 316L, incl. silicone shape seal, 3A, with seal FDA
U7C	Thread ANSI MNPT1-1/2, AlloyC, fm= flush mount
U7D	Thread ANSI MNPT1-1/2, Monel, fm= flush mount
U7J	Thread ANSI MNPT1-1/2,316L,flush mount
U8C	Thread ANSI MNPT2, AlloyC, flush mount
U8D	Thread ANSI MNPT2, Monel, flush mount
U8J	Thread ANSI MNPT2, 316L, flush mount
YYY	Special version, TSP-no. to be spec.

Packaging & Shipping

 

Our product packaging aims to provide functionality and aesthetic appeal. We understand the importance of creating a positive first impression and ensuring the safe delivery of products to customers. The following are the main features of our packaging:
Durable materials: We use high-quality materials that are sturdy and durable, and will not be damaged during transportation. This ensures that our products reach our customers in good condition.
Safe packaging: Our packaging design focuses on a safe outer shell. We use protective layers and liners to prevent any damage to the product caused by external impact or rough handling.
Clear labels: Our packaging includes clear and detailed labels. They provide necessary detailed information, such as product name, quantity, instructions for use, and any necessary warning labels. This helps customers easily identify and understand the product.

Company Profile

Techno (Xiamen) Technology Co., Ltd. is located in the beautiful city of Xiamen, China. Xiamen is also an important port city for China's foreign trade. The founding team of the company has been engaged in the trade of industrial automation products, industrial equipment and production line system engineering, manufacturing of equipment components, and supply of spare parts for core equipment in factories since 2005. We have established close cooperative relationships with various well-known brands around the world, and have rich industry practical experience and supply chain resource advantages.
Our Vision: Based in China, serving the world.
Our Mission: Let China's supply chain and made-in-China products serve the whole world.
Our Concept: Professionalism, integrity, innovation, and win-win.

 

Our Advantages

China has an excellent supply chain system, and we have 20 years of industry work experience.
 

Many leading global manufacturers of industrial automation products have been deeply rooted in the Chinese market for 40 years and have accumulated a lot of inventory.

China has a huge supply chain system, and we have 20 years of work experience in the industrial automation industry.

We focus on customer needs, communicate and cooperate with integrity, and wholeheartedly find the products or alternative solutions that customers need.

 

FAQ

1.Q:How about the warranty?
   A:All goods have 1 year warranty. 
2.Q:What about the delivery time?
   A:Normally in 1-3 Workdays.
3.Q:Other suppliers have a better price than yours?
   A:"In order to maximize your interests, other suppliers have lower prices. You can tell us and we will try our best to offer you the maximum discount, just to make friends with you
4.Q:What about the shipment?
   A:We can arrange shipment by DHL, FedEx, UPS,TNT, EMS with competitive price, of course, customers can also use their own freight forwarders.
5.Q:How about the terms of payment?
   A:Generally through T/T, Paypal and Western Union also accept.